Table of Contents
Advertisement
Solving Problems
Paper Does Not Eject Correctly
The printed paper is curled.
Solutions
Select Settings > General Settings > Printer Settings > Prevent Output Paper Curling, and then select
On.
Original Does Not Feed in the ADF
The following causes can be considered.
Originals that are not supported by the ADF are being used.
Solutions
Use originals supported by the ADF.
"ADF Specifications" on page 346
&
The originals are loaded incorrectly.
Solutions
Load originals in the correct direction, and slide the ADF edge guides against the edges of the originals.
Too many originals are loaded in the ADF.
Solutions
Do not load originals above the line indicated by the triangle symbol on the ADF.
The original slips when paper dust adheres to the roller.
Solutions
Clean the inside of the ADF.
"Cleaning the ADF" on page 164
&
Originals are not detected.
Solutions
On the screen for copy or scan, or fax, check that the ADF icon is on. If it is off, place the originals again.
>
The Printer Does Not Work as Expected
>
Paper Does Not Feed Properly
189
Advertisement
Table of Contents
