Table of Contents
Advertisement
Product Information
Note:
❏ On the Web Config screen, you can find the menu below.
Fax tab > Report Settings
❏ If a password entry screen is displayed, enter the password.
Forwarding Report:
Prints a report after forwarding a received fax document. Select Print to print every time a document
is forwarded.
Backup Error Report:
Prints a report when a backup error occurs on forwarding the sent fax to Backup Destination. You
can set the destination in Fax > Fax Settings > Backup. Note that the backup feature is available
when:
❏ Sending a fax in monochrome
❏ Sending a fax using the Send Fax Later feature
❏ Sending a fax using the Batch Send feature
❏ Sending a fax using the Store Fax Data feature
Fax Log Auto Print:
Prints the fax log automatically. Select On(Every 30) to print a log every time 30 fax jobs are
completed. Select On(Time) to print the log at a specified time. However, if the number of fax jobs
exceeds 30, the log is printed before the specified time.
Attach Fax image to report:
Prints a Transmission Report with an image of the first page of the sent document. Select On(Large
Image) to print the upper part of the page without reducing. Select On(Small Image) to print the
entire page reducing it to fit onto the report.
Report Format:
Selects a format for fax reports in Fax > More tab > Fax Report other than Protocol Trace. Select
Detail to print with error codes.
Output Method:
Select an output method for fax reports, such as Save to Memory Device. When you select Forward,
select Destination from the contacts.
Security Settings
You can find the menu on the printer's control panel below.
Settings > General Settings > Fax Settings > Security Settings
Note:
❏ On the Web Config screen, you can find the menu below.
Fax tab > Security Settings
❏ If a password entry screen is displayed, enter the password.
>
>
Settings Menu List
General Settings
337
Advertisement
Table of Contents
