Graco 17C810 Operation - Repair - Parts page 12

Starting a New Job (or Refilling the Material Cup)
If sprayer fails to prime, try one of the steps
below:
1. Use the Pump Armor storage/startup tool to clean
the inlet valve fitting. See Storage, page 18.
2. Clean air vent holes. See Shutdown and Cleaning,
page 16.
12
ti19536a
Use a soft brush to clean the black rubber inlet seal.
If air vent holes become clogged, use a paper clip to
clean the holes.
ti17323a
ti17326a
3A2587L