Reset All To Default; Auto-Off Timer - Janome 5270QDC Instruction Book

z
x
c
v
z
x
c

• Reset all to default

The following customized settings can be reset to the
original settings (factory default settings).
• Buzzer sound setting
• Needle stop position setting
• Key position adjustment
• Auto-off Timer setting
z Enter the setting mode. Press the mode key 3
times to enter the reset mode.
x Press " " on the cursor key.
The confirmation screen appears.
c To reset the customized settings, press "
cursor key.
To cancel the reset, press "
v The screen will back to the reset mode.
Press the memory key to exit the reset mode.

• Auto-off timer

NOTE:
The auto-off timer is available in EU countries and
some regions which use 200 - 240 voltage standards.
The machine will be turned off if you do not use the
machine within the time period set by this timer.
z Enter the setting mode. Press the mode key 4
times to enter the auto-off timer setting.
The default auto-off timer setting is 7 hours and "07"
sign appears on the screen.
x Press the cursor key to increase or decrease the
setting value.
The auto-off timer can be set from 1 to 12 hours.
If you wish to turn off the timer, press and hold the
cursor key until "oFF" sign appears on the screen.
c Press the memory key to apply the setting.
26
" on the
" on the cursor key.