Smocking; Stippling Stitch - Janome 5270QDC Instruction Book

Hide thumbs Also See for 5270QDC:
Table of Contents

Advertisement

q
w
e
4
q
w
e
q
w
e
4

Smocking

q Stitch pattern:
w Thread tension dial: 3 to 6
e Presser foot:
* The stitch patterns 69, 70, 79-84 and 31-32 in mode 3
can also be used.
Smocking is a delicate decorative treatment used on
children's clothes or women's blouses.
Use a soft and lightweight fabric such as batiste, gingham
or challis.
Cut the fabric three times wider than the projected width.
Select straight stitch, set stitch length at "5.0" and loosen
the thread tension.
Sew rows of straight stitches 3/8˝(1 cm) apart across the
area to be smocked. Knot the threads along one edge.
NOTE:
Use the thread cutter on the face cover when cutting
the threads (refer to page 27).
From the other edge, pull the bobbin threads to distribute
the gathers evenly.
q 3/8˝(1 cm)
w Knotted thread
Set the thread tension to 3–6 and select a smocking
stitch pattern.
Sew the smocking stitch pattern between the rows of
straight stitches.
Remove the straight stitches by pulling them out.
e Straight stitch

Stippling Stitch

q Stitch pattern:
w Thread tension dial: 3 to 6
e Presser foot:
* The stitch patterns 22-25 in mode 3 can also be used.
A pre-programmed stippling stitch is a fast and easy
method to quilt small areas.
Place a batting (wadding) between quilt top and backing
fabric.
58
MODE 2:
65
Satin stitch foot F
MODE 3:
26
Satin stitch foot F

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents