Formatting The Memory; Resetting All To Defaults; Maximum Sewing Speed; Thread Selection - Janome MB-4 Instruction Book

04 NO
05 NO
06 600
07 1

[04] Formatting the memory

If the internal memory does not function due to
damage to the memory bank, you need to re-enable it
by formatting the memory.
Press the right arrow button
Press the ENTER button to format the memory. If you
do not wish to format, press the left arrow button
to change the indication to [NO].
Press the ENTER button to register the new setting or
press the upward arrow button
setting.

[05] Resetting all to defaults

All the parameters in the My setting mode can be
reset to the original values (factory setting).
Press the right arrow
Press the ENTER button to reset the settings to
defaults. If you do not wish to format, press the left
arrow button to change the indication to [NO].
Press the ENTER button to register the new setting or
press the upward arrow button
setting.

[06] Maximum sewing speed

The maximum sewing speed can be set from 400 to
800 spm by 100 spm increments.
Press the right or left arrow button
the sewing speed.
Press the ENTER button to register the new setting or
press the upward arrow button
setting.

[07] Thread selection

There are 6 brands of thread to choose from.
Press the right or left arrow button
the brand number. The color code of the selected
brand will be shown in the Ready to sew mode
display.
The brand numbers are as follows:
1 Janome
2 Gütermann Sulky (rayon 40)
3 Madeira (polyester 40)
4 Mettler (Poly Sheen)
5 Robison-Anton (polyester 40)
6 Robison-Anton (rayon 409)
Press the ENTER button to register the new setting or
press the upward arrow button
setting.
58
to indicate [YES].
to go to the next
button to indicate [YES].
to go to the next
to alter
to go to the next
to select
to go to the next