Bluetooth Module - HP Pavilion DV7-3085 Maintenance And Service Manual

Removal and replacement procedures

Bluetooth module

Description
Bluetooth module (does not include cable)
Bluetooth module cable
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the switch cover and keyboard (see
Remove the Bluetooth module:
1. Disconnect the Bluetooth module cable 1 from the system board.
2. Slide the Bluetooth module out of the slot 2.
3. Remove the module from the computer 3.
Reverse this procedure to install the Bluetooth module.
4–24
"Battery" on page 4-6).
"Switch cover and keyboard" on page
Spare part number
537921-001
583501-001
4-19).
Maintenance and Service Guide