Modem Module Cable - HP Pavilion DV7-3085 Maintenance And Service Manual

Removal and replacement procedures
Reverse this procedure to install the TV tuner module cable.

Modem module cable

✎
The modem module cable is available in the Cable Kit, spare part number 516328-001. The modem module
cable includes the RJ-11 jack.
Before removing the modem module cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Optical drive (see
b. Hard drive (see
c. TV tuner module (see
d. Switch cover and keyboard (see
e. Speaker assembly (see
f. Display assembly (see
g. Top cover (see
h. System board (see
i. USB board (see
Remove the modem module cable:
1. Release the cable from the clips 1 built into the base enclosure.
2. Remove the RJ-11 jack 2 from the clip built into the base enclosure.
4–44
"Battery" on page
"Optical drive" on page
"Hard drive" on page 4-11)
"TV tuner module" on page
"Switch cover and keyboard" on page
"Speaker assembly" on page
"Display assembly" on page
"Top cover" on page 4-34)
"System board" on page
"USB board" on page 4-41)
4-6).
4-7)
4-18)
4-23)
4-25)
4-37)
4-19)
Maintenance and Service Guide