Table of Contents
Advertisement
Bluetooth module
NOTE:
The Bluetooth module spare part kits do not include a Bluetooth module cable. The Bluetooth
module cable is available in the Cable Kit, spare part number 517757-001.
Description
Bluetooth module
Before removing the Bluetooth module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Memory module (see
c.
WWAN module (see
d.
WLAN module (see
e.
Keyboard (see
f.
Top cover (see
g.
Fan (see
Remove the Bluetooth module:
1.
Remove the Phillips PM2.0×3.0 screw (1) that secures the Bluetooth module to the base enclosure.
2.
Disconnect the Bluetooth module cable (2) from the system board.
Battery on page
Hard drive on page
Memory module on page
WWAN module on page
WLAN module on page
Keyboard on page
Top cover on page
Fan on page
55)
39).
40)
43)
45)
47)
50)
53)
Component replacement procedures
Spare part number
483113-001
57
Advertisement
Table of Contents
