Power Connector - HP Pavilion DV6-3127 Maintenance And Service Manual

Power connector

Description
Power connector
Before removing the power connector cable:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet
and then disconnecting the AC adapter from the computer.
4.
Remove the following components:
a.
Battery on page 53
b.
Hard drive cover on page 54
c.
Hard drive on page 55
d.
Optical drive on page 63
e. Keyboard on page 65
f. Top cover on page 67
g. Touchscreen display assembly on page 72
h. USB board on page 87
To remove the power connector cable:
1.
Remove the two screws (1) that secures the power connector and bracket to the base enclosure.
Spare part number
603692-001
or BrightView display assembly on page 77
Component replacement procedures
89