Rj-45 Connector - HP Pavilion DM1z-3000 Maintenance And Service Manual

Reverse this procedure to install the RJ-45 connector cover.

RJ-45 connector

Description
RJ-45 connector (includes cable)
Before removing the RJ-45 connector, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation mode,
turn on the computer, and then shut it down using the operating system.
2. Disconnect all of the external devices that are connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Service cover (see
b. Hard drive (see
c. Keyboard (see
d. Top cover (see
e. Display assembly (see
f. System board (see
Remove the RJ-45 connector:
To remove the RJ-45 connector, follow these steps:
1. Remove the 2 screws that secure the RJ-45 connector to the base enclosure (1).
2. Lift up and remove the RJ-45 connector (2).
64 Chapter 4 Removal and replacement procedures
Battery on page 32).
Hard drive / Solid state drive on page
Hard drive / Solid state drive on page
Keyboard on page 43).
Top cover on page 46).
Display assembly on page
System board on page
33).
33).
52).
57).
Spare part number
636452-001
ENWW