Accessory Problems; Audio Problems - HP OmniBook 7100 User Manual

See the printed OmniBook Reference Guide. You can obtain a backup copy of
this guide from the HP website (http://www.hp.com/omnibook).
Check OmniBook Notes for the most current troubleshooting suggestions (Start,
Programs, OmniBook Library, OmniBook Notes).
Look at the online Help for Windows and other applications.
Check with your computer system administrator, if you have one.
Check your local library or bookstore for other books about Windows, MS-DOS,
and other applications.
Contact your dealer, or contact Hewlett-Packard. See the OmniBook Support
and Service booklet or open OmniBook Support in the online OmniBook Library.
Click Start and Help to use the Windows "troubleshooters" provided for several
types of common problems. On the Contents tab, open the Troubleshooting
book, then start the desired troubleshooter.

Accessory Problems

If a port on a dock isn't working
Check that ac power is connected.
Try using the corresponding OmniBook port while undocked.
If you can't boot from a CD in the CD-ROM drive
Make sure the CD is a bootable CD, such as the Recovery CD.
Make sure the CD-ROM / floppy disk drive is seated correctly in the
OmniBook—remove and reinsert.
If you always want to boot from a CD, check boot order in the BIOS Setup utility.
1. From the Start menu, shut down, then restart the OmniBook.
2. When you see the HP logo, press F2 to enter the BIOS Setup utility.
3. Open the Boot menu. The default boot order is
Diskette Drive
Hard Drive
CD-ROM Drive
4. If CD-ROM Drive is not option 1, use the arrow keys to select CD-ROM
Drive.
5. Press F6 to move up (or F5 to move down) in the list.
6. Press F10 to Save and Exit the BIOS Setup utility.
Make sure you are using an internal OmniBook CD-ROM / floppy disk drive
module. You cannot boot from an external CD-ROM drive, which you can
connect to the OmniBook via a PC Card SCSI connection.
Reset the OmniBook.

Audio Problems

41