Operating The Omnibook; Powering The Omnibook; To Connect Ac Power; Starting And Stopping The Omnibook - HP OmniBook 7100 User Manual

Hp omnibook 7100: user guide

Hide thumbs Also See for OmniBook 7100:

Table of Contents

2. Operating the OmniBook

Using the OmniBook Pointing Devices.

Using the OmniBook Display.

Adjusting the Sound System.

Using the OmniBook Keyboard.

Checking the Status of the OmniBook.

Protecting the OmniBook.

Powering the OmniBook

There are two ways to power the OmniBook: by ac adapter and by battery.

Caution

Use only the HP adapter intended for this product, model F1454A. Using any

other ac adapter could damage the OmniBook and may void your warranty.

Refer to the warranty statement for your product.

1. Connect the power cord to the ac adapter, then plug the cord into an ac outlet.

The light on the ac adapter shines when the adapter is powered.

2. Connect the ac adapter to the OmniBook's left side, as shown.

3. Press the blue power button to turn on the OmniBook.

When the OmniBook is plugged into ac power and a battery is installed, it

automatically recharges the battery. To check the status of the battery, see

"Checking the Status of the OmniBook."

Starting and Stopping the OmniBook

Table of Contents