To Connect A Printer Or Other Parallel Device - HP OmniBook 7100 User Manual

2. Connect the monitor cable from the monitor to the VGA port on the rear of the
OmniBook.
3. Connect the monitor to a power source and turn it on.
4. Press the blue power button to turn on the OmniBook.
5. If the external monitor has a different resolution from the internal display, adjust
the display properties (Start, Settings, Control Panel, Display, Settings).
Hint
Switching Displays. Use Fn+F5 to switch among the built-in display, an external
display, and simultaneous displays.

To connect a printer or other parallel device

The most common parallel device is a printer.
Connect the parallel printer cable or other parallel cable to the parallel port.
31