Installation Example Using The Original Mounting Bracket; Install The Display Unit - Alpine HALO9 iLX-F309 Owner's Manual

Microphone
Cable clamp
(Sold separately)
Installation example using the Original
Mounting Bracket
1
Mount the original mounting bracket to the main unit
using the supplied screws.
• If you do not have the original mounting bracket, mount the Double din
KIT (provided with the side mounting bracket), etc. to the main unit.
Sold separately.
Original Mounting Bracket
2
Connect all other leads of the main unit according to
details described in the "Connections" (page 9).
Note on using HDMI Connection Cables (HDMI Cable not
included)
When using HDMI connection cables, secure the cables to the HDMI
Terminals with the supplied HDMI Bracket.
1) Slide the HDMI Bracket into the grooves (A).
2) Secure it with the screw (B).
HDMI Terminal
(A)
(B)
3
• Fix the cables carefully. Do not damage them by mounting them into
4
1
Screws (M5×8)
(Included)
(A)
• Vertical positioning screws may need to be removed earlier (See Step 4)
HDMI Bracket
(Included)
Mount the main unit in a car.
movable parts, such as the seat rail, or by locating them against sharp or
pointed edges.
Reattach the removed vehicle parts (panels, etc.) or
other aftermarket dash kit back onto the vehicle.

Install the display unit

Remove the 2 angle adjustment screws (M4×6) fixing the
left and right sides of the Display unit and pull the top of
the display forward.
Display unit
Angle adjustment screws (M4×6) (left and right)
in order to manipulate the screen enough to install the POWER PLATE.
5
-EN