Setting The Source Category; Setting The Default Vehicle Screen; Setting The Maestro Module; External Accessories Setup - Alpine HALO9 iLX-F309 Owner's Manual

Setting the Source Category

You can set whether the following source icon in the Menu screen is
available.
Setting item:
USB/iPod (Initial setting: Both) / SiriusXM (Initial setting: Aftermarket)
Setting contents:
Both / Factory / Aftermarket
Both*: Both the sources listed above from this unit and
iDataLink module are available.
Factory: Only the source listed above from iDataLink module is
available.
Aftermarket: Only the source listed above from this unit is available.
* USB/iPod only.
• The iDataLink source icons not displayed on the Menu screen when no
iDataLink module is connected even though "Both" or "Factory" is set.
• You cannot set the source that is currently being played.

Setting the Default Vehicle Screen

Press and hold the (Favorite) button for at least 2 seconds or touch
the Menu screen (page 18) to display the Info mode screen, and then set
the following.
Setting item:
Default Vehicle Screen
Setting contents:
Climate / Vehicle Info. / Gauges / Parking Assist / Last mode (Initial setting)
• Depending on the car, some setting contents or this setting item may not
be displayed.

Setting the Maestro Module

You can change the setting of the connected iDataLink module.
Setting item:
Maestro Module
• Depending on the iDataLink module, the setting contents may differ.

External Accessories Setup

[External Accessories] is selected on the System Setup Menu screen in
step 1. See "System Setup" (page 43).

Setting the External Audio Processor

When using an external audio processor, set to "On" (
Setting item:
External Audio Processor
Setting contents:
Off (Initial setting) / On
• When this setting is "On, " the Volume level is fixed at 10. Also, Balance/
Fader/Subwoofer Level/Subwoofer Phase/Bass/Treble/MX HD/EQ
Presets/Dual HD EQ/X-Over/Time Correction/Defeat/Phone Speaker/
Default Sound Settings are set to "Off " or "Flat" and cannot be
adjusted.
• Use the External Audio Processor to adjust volume.

Setting the External Accessory Control

When you have connected the optional External Accessory Control
module, set this setting to "On" to turn the headlights ON/OFF or adjust
the air suspension from this unit.
Setting item:
External Accessory Ctrl
Setting contents:
Off (Initial setting) / On
• When set to "On, " the [Ext Acc Ctrl] icon is displayed on the Menu
screen.
• For details on the External Accessory screen and its operation, see
"External Accessory Control Operation" (page 80).
).
45
-EN