System Setup; Camera Setup; Setting The Camera Input; Setting The Camera Signal Input - Alpine HALO9 iLX-F309 Owner's Manual

System Setup

[System] is selected on the Setup main screen in step 3. See "Setup
Operation" (page 26).
System Setup Menu screen
<Setting items>
Camera
Camera Select
1
Camera Signal*
1
Guide Adjustment*
Camera Interrupt (Power Mode)*
Factory System Setup
USB/iPod / SiriusXM
Default Vehicle Screen
Maestro Module
External Accessories
External Audio Processor
External Accessory Ctrl
Smartphone Apps
2
Alpine TuneIt App*
*1 When Camera Select is set to "Off, " you cannot select this item.
*2 Set this setting after closing the Alpine TuneIt App.
The following steps 1 to 3 are common to each "Setting
item" of System Setup. See each section for details.
1
Select the desired item.
2
To switch the setting, touch [ ], [ ], [ ], [ ], or mark the
checkboxes "Off" ( ) or "On" (
• If " " appears, there is a further hierarchy. Touch the desired
item.
3
Touch [ ] to return to the main source screen.
• To return to the previous List screen, touch [ ] or [ ] in the
previous page. For details, see "About Basic Operation for List
Screen" (page 16).
1
).

Camera Setup

[Camera] is selected on the System Setup Menu screen in step 1. See
"System Setup" (page 43).
You can set up items related to the Camera.

Setting the Camera Input

Setting item:
Camera Select
Setting contents:
Off (Initial setting) / Rear
Off: No camera is connected
Rear: Rear camera is connected

Setting the Camera Signal Input

When the camera is connected, the video input signal type can be
chosen.
Further setting item:
Camera Signal
Setting contents:
NTSC (Initial setting) / PAL

Adjusting the Rear Camera Guide

You can adjust the camera guide position.
Setting item:
Guide Adjustment
1
Touch [Guide Adjustment].
The camera guide adjustment screen is displayed.
• To adjust the guide position of the Rear Camera, touch [Hitch
Guide On] or [Hitch Guide Off] to display/hide the Hitch Guide.
You can adjust the Hitch Guide to mark the position of the
junction between your vehicle and your trailer.
2
Touch [Adjust].
• If [Adjust] does not appear, proceed to step 3.
3
Touch the guide you intend to adjust.
Guide line can also be selected by touching [ ] [ ].
43
-EN