Chapter 6.16 Alignment Guides - Compaq LTE 5100 Maintenance And Service Manual

4. Remove the two screws from the speaker bracket [3] and lift the bracket
and board out of the bottom cover assembly [4] (Figure 6-28).
Reverse the above procedure to install a speaker assembly, paying
particular attention to the cable routing.

Chapter 6.16 Alignment Guides

The bottom cover assembly must be removed before removing the alignment
guides. The alignment guide assembly consists of the guide, spring, and
bracket.
IMPORTANT: There is a left alignment guide and a right alignment guide.
They are keyed for proper installation.
The assembly is mounted to the expansion base with one screw. To remove
the CPU guide assembly, complete the following steps:
1. Prepare the expansion base for disassembly as described in Section 6.3.
2. Remove the bottom cover assembly as described in Section 6.5.