Compaq LTE 5100 Maintenance And Service Manual page 145

2. Flex the center of the door up until the pivots on each end of the door
disengage the pivot holes in the computer housing (Figure 5-21).
Reverse this procedure to install the PC Card door.
Chapter 5.5 CPU Cover Assembly
The CPU cover assembly must be removed to gain access to any of the
interior components of the computer, and it is the first component that
has to be removed to gain access to the interior components. Maintenance
of the CPU cover assembly includes replacement of the following:
o CPU cover assembly
o Power switch actuator
o Standby (Suspend) button
o Display switch button
Additionally, the integrated microphone can be accessed for service when
the CPU cover is removed.