Optical Drive - HP ENVY 17-2090 Maintenance And Service Manual

4. Remove the USB/Card Reader board (4).
Reverse this procedure to install the USB/Card Reader board.

Optical drive

NOTE: The optical drive spare part kit includes a optical drive bracket.
Description
Blu-ray ROM DVD±RW Super Multi Double-Layer Drive
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
a. memory module compartment cover (see
b. Keyboard (see
c. Top cover (see
Battery on page 37), and then remove the following components:
Keyboard on page 50)
Top cover on page 52)
Memory module on page
Component replacement procedures
Spare part number
603790-001
603789-001
42)
57