Table 30 Basic Setting > IP Setup > IP Configuration (continued)
LABEL
Cancel
Index
IP Address
IP Subnet Mask
VID
Type
Delete
Cancel
8.6.4 Network Proxy Configuration
The proxy server of an organization may prohibit communication between the Switch and NCC (Nebula
Control Center)
Switch and NCC through the proxy server.
Figure 66 Network Proxy Configuration Application
As of this writing, this setting only allows communication between the Switch and the NCC.
Figure 67 Basic Setting > IP Setup > IP Configuration > Network Proxy Configuration
Chapter 8 Basic Setting
DESCRIPTION
Click Cancel to reset the fields to your previous configuration.
This field displays the index number of an entry.
This field displays the IP address of the Switch in the IP domain.
This field displays the subnet mask of the Switch in the IP domain.
This field displays the VLAN identification number of the IP domain on the Switch.
This field displays the type of IP address status.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Delete to remove the selected entry from the summary table.
Note: Deleting all IP subnets locks you out of the Switch.
Click Cancel to clear the check boxes.
(Section 8.11 on page
117). Use this screen to enable communication between the
XS1930 Series User's Guide
94