ZyXEL Communications XS1930-12F User Manual page 93

Figure 65 Basic Setting > IP Setup > IP Configuration
The following table describes the labels in this screen.
Table 30 Basic Setting > IP Setup > IP Configuration
LABEL DESCRIPTION
Default Type the IP address of the default outgoing gateway in dotted decimal notation, for example
Gateway 192.168.1.254.
Domain Name Enter a domain name server IPv4 address in order to be able to use a domain name instead of
Server 1/2 an IP address.
Apply Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to reset the fields to your previous configuration.
IP Interface
Use these fields to create or edit IP routing domains on the Switch.
DHCP Client Select this option if you have a DHCP server that can assign the Switch an IP address, subnet
mask, a default gateway IP address and a domain name server IP address automatically.
Static IP Select this option if you do not have a DHCP server or if you wish to assign static IP address
Address
information to the Switch. You need to fill in the following fields when you select this option.
IP Address Enter the IP address of your Switch in dotted decimal notation, for example, 192.168.1.1. This is
the IP address of the Switch in an IP routing domain.
IP Subnet Enter the IP subnet mask of an IP routing domain in dotted decimal notation, for example,
Mask
255.255.255.0.
VID Enter the VLAN identification number to which an IP routing domain belongs.
Add Click this to create a new entry.
This saves your changes to the Switch's run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the Save link on the top navigation panel to save your changes
to the non-volatile memory when you are done configuring.
Chapter 8 Basic Setting
XS1930 Series User's Guide
93