Table of Contents
Advertisement
b.
Grasp the edge of the memory module (2), and then gently pull the module out of the
memory module slot.
CAUTION:
module by the edges only. Do not touch the components on the memory module. To
protect a memory module after removal, place it in an electrostatic-safe container.
7.
Insert a new memory module.
CAUTION:
the edges only. Do not touch the components on the memory module, and do not bend the
memory module.
a.
Align the notched edge (1) of the memory module with the tab in the memory module slot.
b.
Position the memory module at a 45-degree angle from the surface of the memory module
compartment, and then press the module (2) into the slot until the memory module is
seated.
40
Chapter 5 Maintenance
To reduce the risk of damage to the memory module, hold the memory
To reduce the risk of damage to the memory module, hold the memory module by
Advertisement
Table of Contents
