Table of Contents
Advertisement
2.
Remove the battery cover. The battery cover is included in the Door Kit, spare part number
608384-001.
3.
Slide the right battery release latch (1) to unlock the battery.
4.
Slide and hold the left battery release latch (2) to release the battery.
5.
Pull the battery tab (3), and then remove the battery from the computer.
To insert the battery:
1.
Align the tabs on the front edge of the battery with the notches on the front edge of the battery
bay.
2.
Rotate the rear edge of the battery down into the battery bay until it is seated.
3.
Slide the right battery release latch to lock the battery into place. (The left battery release latch
will automatically lock into place.)
4.
Replace the battery cover, and then slide the battery cover back until it is seated. (The battery
cover release latch will automatically lock into place.)
SIM
Before removing the SIM, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
Component replacement procedures
35
Advertisement
Table of Contents
