Speaker - HP EliteBook 2540P Maintenance And Service Manual

Reverse this procedure to install the card reader board, cable, and bracket.

Speaker

Description
Speaker
Before removing the speaker, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
a. Memory module compartment cover (see
b. Wireless module compartment cover (see
c. Switch cover and keyboard (see
d. Display assembly (see
e. Top cover (see
Remove the speaker:
1. Disconnect the speaker cable (1) from the system board.
2. Remove the Phillips PM2.0×4.0 screw (2) and the Phillips PM2.0×6.0 screw (3) that secure the
speaker to the base enclosure.
ENWW
Battery on page 48), and then remove the following components:
Switch cover and keyboard on page
Display assembly on page
Top cover on page 85)
Expansion memory module on page
WLAN module on page
76)
Component replacement procedures
Spare part number
598799-001
52)
57)
69)
91