Low-Voltage Hard Drive Or Solid-State Drive - HP EliteBook 2540P Maintenance And Service Manual

Low-voltage hard drive or solid-state drive

NOTE: The 4.57-cm (1.80-in) hard drive and solid-state drive spare part kit includes a hard drive or
solid-state drive bracket.
Description
4.57-cm (1.80-in), 320-GB, 5400-rpm hard drive
4.57-cm (1.80-in), 250-GB, 5400-rpm hard drive
4.57-cm (1.80-in), 160-GB, 5400-rpm hard drive
4.57-cm (1.80-in), 160-GB, solid-state drive
4.57-cm (1.80-in), 80-GB, solid-state drive
Before removing the low-voltage hard drive or solid-state drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the memory module compartment cover (see
Remove the low-voltage hard drive or solid-state drive:
1. Position the computer with the front toward you.
2. Loosen the 2 captive screws (1) that secure the hard drive shield to the computer.
54 Chapter 4 Removal and replacement procedures
Battery on page 48).
Expansion memory module on page
Spare part number
614537-001
598778-001
598777-001
598782-001
602675-001
52).
ENWW