Optical Drive - HP EliteBook 2540P Maintenance And Service Manual

Notebook pc
Hide thumbs Also See for EliteBook 2540P:
Table of Contents

Advertisement

Optical drive

NOTE:
The optical drive is an optional feature and is available only on computer models equipped
with a low voltage (25-W) processor.
Description
DVD±RW and CD-RW SuperMulti Double-Layer Drive
DVD-ROM Drive
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the memory module compartment cover (see
Remove the optical drive:
1.
Position the computer with the right side toward you.
2.
Remove the two Phillips PM2.0×5.0 screws that secure the optical drive to the computer.
3.
Insert a flat-bladed screwdriver or similar tool into the optical drive tab access (1) and press the
tab to the right to release the optical drive from the computer.
ENWW
Battery on page
48).
Expansion memory module on page
Component replacement procedures
Spare part number
598776-001
598775-001
52).
63

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents