Bluetooth Module Cable - HP EliteBook 2540P Maintenance And Service Manual

3. Remove the speaker (4) from the base enclosure.
Reverse this procedure to install the speaker.

Bluetooth module cable

NOTE: The Bluetooth module cable is included in the Cable Kit, spare part number 598766-001.
Before removing the Bluetooth module cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
a. Memory module compartment cover (see
b. Wireless module compartment cover (see
c. Switch cover and keyboard (see
d. Display assembly (see
e. Top cover (see
92 Chapter 4 Removal and replacement procedures
Battery on page 48), and then remove the following components:
Switch cover and keyboard on page
Display assembly on page
Top cover on page 85)
Expansion memory module on page
WLAN module on page
76)
52)
57)
69)
ENWW