HP EliteBook 2540P Maintenance And Service Manual page 90

Notebook pc
Hide thumbs Also See for EliteBook 2540P:
Table of Contents

Advertisement

c.
Remove the ambient light sensor board (3). The ambient light sensor board is available
using spare part number 598761-001.
14.
If it is necessary to replace the webcam module, display hinges, display panel cable, or display
enclosure:
a.
Release the display panel cable (1) from the clips built into the display enclosure.
b.
Disconnect the display panel cable (2) from the ambient light sensor board.
c.
Remove the two Torx T8M2.5×6.0 screws (1) that secure the display panel and hinges to
the display enclosure.
d.
Lift the bottom edge of the display panel (2) until it rests at an angle.
82
Chapter 4 Removal and replacement procedures
ENWW

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents