Introduction; Description - Texas Instruments AM5729 User Manual

Hide thumbs Also See for AM5729:
Table of Contents

Advertisement

1

Introduction

This document describes the hardware architecture of the AM572x Industrial Development Kit (IDK)
Evaluation Module (EVM) (Part# TMDXIDK572x) that supports the Texas Instruments Sitara™ ARM
Cortex
-A15 AM572x processor family.
®
1.1

Description

The AM572x IDK is a standalone test, development, and evaluation module that enables developers to
write software and develop hardware for industrial control and industrial communications applications. It
has been equipped with a TI AM5728 processor and a defined set of features to allow you to experience
industrial communication solutions using various serial or Ethernet based interfaces. Using standard
interfaces, the AM572x IDK may interface to other processors or systems and act as a communication
gateway or controller. In addition, it can directly operate as a standard remote I/O system or a sensor
connected to an industrial communication network.
The AM572x IDK contains embedded emulation circuitry to quickly enable developers to begin using this
IDK. The embedded emulation logic allows emulation and debug using standard development tools such
as the Texas Instruments Code Composer Studio™ integrated development environment (IDE) by simply
connecting a USB cable to a Windows
The standard configuration for the AM572x IDK EVM provides the following Ethernet connectivity:
Two Gigabit (1000Mb) metallic ports connected via PHY/RGMII to the on-chip Ethernet switch
Two 100Mb metallic ports connected via PHY/MII to the PRU-ICSS subsystems
Reconfiguration through resistor removal and installation can provide an alternate Ethernet connectivity:
Four 100Mb metallic ports connected via PHY/MII to the PRU-ICSS subsystems
Software support for the AM572x IDK EVM is provided within the Processor Software Development Kit
(SDK) package. This includes both Linux and RTOS support.
6
AM572x Industrial Development Kit (IDK) Evaluation Module (EVM)
Hardware
AM572x Industrial Development Kit (IDK)
Evaluation Module (EVM) Hardware
-based computer.
®
Copyright © 2017–2019, Texas Instruments Incorporated
SPRUI64E – May 2017 – Revised September 2019
SPRUI64E – May 2017 – Revised September 2019
Submit Documentation Feedback
User's Guide
®

Advertisement

Table of Contents
loading

This manual is also suitable for:

Am572 seriesAm5728Am5726Am5718Am5716

Table of Contents