Sharp MX-3071 Troubleshooting Manual page 47

Fax Problems
THE DATA NOTIFICATION INDICATOR DOES
?
NOT TURN OFF
Check
Did you retrieve a received fax that
was printed?
Is an error preventing received faxes
from being printed?
I DON'T KNOW HOW TO CHECK AN ADDRESS
?
WHEN SENDING A FAX
Check
Tap the [Address Review] key.
Is "Fax Dest. Confirmation Mode"
enabled in setting mode?
Solution
!
■ The data notification indicator blinks until received faxes are retrieved.
■ The data notification indicator blinks when a received fax remains in memory
without being printed. Clear the error that is preventing printing.
Solution
!
■ Tap the [Address Review] key to view a list of the addresses.
■ Enable "Settings (administrator)" - [System Settings] → [Image Send Settings] →
[Fax Settings] → [Condition Settings] → [Fax Dest. Confirmation Mode]. When
this setting is enabled, an address confirmation message will appear when you
send a fax to prevent erroneous transmission.
47