Table of Contents
Advertisement
Analog Accessories
Digital Cables (PCI-4451/4452 Only)
© National Instruments Corporation
To create your own accessories for use with the SHC68-C68 cable, you can
use an AMP 68-pin right-angle PWB receptacle header, part number
787254-1.
Recommended manufacturer part numbers for the 68-pin mating connector
for the cable assembly are as follows:
•
AMP 68-position straight cable plug, part number 787131-3
•
AMP 68-position backshell with jackscrews, part number 787191-1
To develop your own cable, the mating connector for the digital I/O is a
50-position receptacle. For a connector pinout assignment, refer to
Figure 4-3,
Digital Pin Connections
Pin
Assignment. Recommended manufacturer part numbers for this mating
connector are as follows:
•
50-position straight cable plug, part number 787131-1
•
50-position backshell with jackscrews, part number 787233-1
Refer to Figure B-2,
68-Pin Digital Connector for Any Digital
for pin assignments for digital accessories and cables.
and Table 4-5,
1-7
PCI-4451/4452/4453/4454 User Manual
Chapter 1
Introduction
Digital I/O Connector
Accessory,
Advertisement
Table of Contents
