Chicago Electric 90300 Operating Instructions Manual page 15

To Start The Generator:
1. Turn the Fuel Valve (31) to its vertical
"OPEN" position.
(See Figure F.)
2. Move the Engine's Choke all the way
to the left to its "START" position.
(See Figure F.)
3. Turn the Engine's "ON/OFF" switch to
its "ON" position. (See Figure G.)
4. Insert the Ignition Key into the Igni-
tion Switch (45), and turn the Ignition
Key to the right to start the Engine.
(See Figure H.)
5. Allow the Engine to run for several
seconds, then move the Engine's
Choke all the way to the left to its
"RUN" position. (See Figure F.)
NOTE: DO NOT ATTEMPT TO ADJUST
THE ENGINE'S THROTTLE! This engine
uses a governor device to automatically
control the engine's speed. If the throttle
is adjusted, it may result in decreased ef-
ficiency and/or damage to the unit.
OVERLOAD BREAKERS
(42)
FIGURE H
SKU 90300 For technical questions, please call 1-800-444-3353.
TWISTLOCK OUTLET
120V DUAL OUTLET
(43)
FUEL VALVE (31)
Hidden from view
ON/OFF
Switch
120/240 V
(44)
IGNITION SWITCH
(45)
FIGURE F
FIGURE G
GROUNDING POINT
REV 06/04; 08/04; 11/04
PAGE 15
CHOKE