Installing An Expansion Module - Siemens SIMATIC IL43 Operating Instructions Manual

10.3.2

Installing an expansion module

Preparation
Isolate the device from mains
Installing expansion modules
Steps for installing an expansion module:
1 Open the device.
2 Remove the fastening screws (1) and
lift out the module bracket (2)
3 Remove the relevant steel slot cover
(3).
4 Insert the expansion module (4) into
the relevant slot.
5 Screw down the steel slot cover (3)
for the expansion module.
6 Insert the module bracket again.
7 Loosen free module bracket (5),
mount and screw down on the
expansion module
8 Close the device.
SIMATIC Rack PC IL 43
Operating Instructions, Edition 09/2005, A5E00432875-01
Expansions and configuration
10.3 Installing expansion cards
10-5