Compaq Armada E700 Series Reference Manual page 99

6. Remove the screw
compartment cover to the computer.
If the computer shipped with a preinstalled memory
expansion board—
The memory expansion compartment cover is
attached with a tamper-resistant Torx T-10 memory
security screw.
Use the Torx T-10 screwdriver included with the
computer to remove and reinsert this screw.
If the computer shipped with an empty memory
expansion compartment—
The memory expansion compartment cover is attached
with a standard Torx T-8 screw, as shown below.
Use a standard Torx T-8 screwdriver to remove and
reinsert this screw.
7. Slide left, then lift and remove
compartment cover
attaching the memory expansion
the memory expansion
.
Expanding Memory 13-3