Compaq Armada E700 Series Reference Manual page 102

Replacing the Memory Expansion Compartment Cover
1. Lay the memory insulator
ensuring that all edges of the memory insulator are tucked
inside the memory expansion compartment.
2. Replace the memory expansion compartment cover
placing it flush left over the memory expansion compartment,
then sliding the memory expansion compartment cover right
until it is seated .
3. Replace the screw
compartment cover to the computer. You can use
One of the tamper-resistant Torx T-10 memory security
screws included with the computer, as shown below,
or
A standard Torx T-8 screw.
NOTE:
you can also use the Torx T-10 screwdriver included with
the computer.
13-6 Expanding Memory
If you use the Torx T-10 memory security screw,
over the memory expansion slots,
that attaches the memory expansion
by