Compaq Armada E700 Series Reference Manual page 72

Accessing a Protected Hard Drive
1. Ensure that the drive is inserted into the computer (not an
optional docking base).
2. When prompted for a DriveLock password, type the user or
master password, using the same keys you used to set the
password, then press
password correctly, you must restart the computer to try again.
Changing a DriveLock Password or
Removing DriveLock Protection from a Drive
CAUTION:
and loss of work, shut down the computer before inserting or
removing a hard drive. Do not insert or remove a hard drive while the
computer is on, in Suspend (Standby), or in Hibernation. To ensure
that the computer is not in Hibernation, turn the computer on, then
shut it down.
1. Ensure that the protected hard drive is inserted into the
computer (not an optional docking base).
2. Turn on the computer, then press
appears upper-right on the screen.
To change the language, press
For navigation instructions, press
3. Select SecurityÅDriveLock passwords, then press
4. Select the location of the hard drive, then press
To change a user or master password—In the field of the
password you want to change, type the current password in
the Old Password field, type the new password in the New
Password and Verify New Password fields, then press
To remove DriveLock protection from the drive—
Toggle the protection field to disable and press
type your master password in the Old Password field and
press
5. To save your changes, then exit Computer Setup and restart
the computer, select FileÅSave Changes and Exit.
6. When prompted to confirm your action, press
7-8 Securing the Computer
Enter
To prevent damage to the computer and the hard drive
F10.
. After 2 attempts to enter the
when the blinking cursor
F10
F2.
F1.
Enter.
F10.
F10.
. Then
F10
F10.