Compaq Armada E700 Series Reference Manual page 12

Identifying Hardware Components
Component
Weight savers (2)
Power cord
AC Adapter (external AC
Adapter models only)
Modem cable (internal
modem models only)
Country-specific modem
adapter (provided with
internal modem models by
region as required)
Network cable (network
models only)
Video-out adapter
Bag containing two spare
pointing stick caps
(EasyPoint IV pointing-stick
models only)
Security kit containing
Torx T-10 memory
security screws (2)
Torx T-10 screwdriver
to use with memory
security screws
3-to-2-prong plug adapter
(Japan only)
*In Windows 98 the term Standby replaces the term Suspend.
Continued
Function
Protect an empty MultiBay.
Can replace a MultiBay device to
reduce computer weight.
NOTE: A weight saver can be inserted or
removed while the computer is on, off,
in Hibernation, or in Suspend.*
Internal adapter models: connects
computer to AC electrical outlet.
External adapter models: connects
AC Adapter to AC electrical outlet.
Converts AC power to DC power.
Connects modem to RJ-11 telephone
jack or to a country-specific adapter.
Adapts modem cable to non-RJ-11
telephone jacks.
Connects computer to an Ethernet
network jack.
Adapts video-out jack to S-video and
composite video devices.
To replace a worn pointing stick cap:
1. Turn off the computer.
2. Gently pull off the used rubber
pointing stick cap, then push the
replacement cap into place.
The screws are tamper-resistant
replacement screws for the memory
expansion compartment cover.
If the computer shipped with an
empty memory expansion
compartment, the cover is secured
with a standard screw.
If the computer shipped with a
factory-installed memory expansion
board, the cover is secured with a
Torx T-10 memory security screw.
Adapts the power cord to a 2-prong
electrical outlet.
Getting Started 1-3