Compaq Armada E700 Series Reference Manual page 110

4. Select a test type.
Quick Test—Runs a quick, general test on each device in a
selected category.
Complete Test—Performs maximum testing on each
device in a selected category.
Custom Test—Performs maximum testing on a selected
device.
To run all tests for your selected device, select the Check
All button.
To run only the tests you select, select the Uncheck All
button, then select the checkbox for each test you want
to run.
5. Select a test mode.
Interactive Mode—Provides maximum control over the
testing process. You determine whether the test was passed
or failed and may be prompted to insert or remove devices.
Unattended Mode—Does not display prompts. If errors are
found, they are displayed when testing is complete.
6. Select the Begin Testing button.
7. Access the test information. To view test information, select a
report.
Status tab—Summary of the tests run, passed, and failed
during the current testing session.
Log tab—Lists tests run on the computer, the numbers of
times each test has run, the number of errors found on each
test, and the total run time of each test.
Error tab—Lists all errors found on the computer with
their error codes.
8. To save
Test information—Select the Save button on the Log tab.
Error reports—Select the Save button on the Error tab.
9. To close Compaq Diagnostics, select FileÅExit.
15-6 Configuration and Diagnostic Utilities