Advertisement
Step 7
I20
The main frame pieces give rigidity to
the side walls and provide a surface
for attaching the gables which sup-
port the roof.
1
Fasten the rear wall angle as-
sembly across the inside top of the
rear wall using screws.
2
Fasten the rear wall channel as-
sembly across the middle of the rear
wall using screws.
3
Fasten the side wall angles across
the inside top of the side panels using
screws. Side wall angles must overlap
rear wall angle in corners.
4
Fasten the side wall channels
across the middle of the side panels
using screws. Fasten overlaps in rear
corners with screws.
5
Fasten the door track assembly
(holes on top) across the top of the
front wall panels using screws. See
the gure.
NOTE
The wall channels behind the
front wall panels will be installed
in a later step.
Parts Needed For
Frames
Wall Angles
Must Face
Inside
Building
STEP
STEP
1
2
8476
STEP
STEP
4
3
9366
20
Door Track Assembly (1)
Rear Wall Angle Assembly (1)
8476 Side Wall Angle (2)
Rear Wall Channel Assembly (1)
9920 Side Wall Channel (2)
5986
9917
9920
Long Leg
on Top
Opening
Facing in
Short Leg
on Bottom
STEP
5
Advertisement
