Advertisement
Step 2
I15
The main frame pieces reinforce
the walls. These pieces will later be
installed in the center and at the top
edge of the rear wall. Proceed as
follows:
1
Overlap the rear wall channel
pieces as shown in the figure and
fasten the two pieces together with
one bolt in the center hole (three
holes will align).
2
Overlap the rear wall angle pieces
as shown in the figure and fasten
them together with one bolt in the
center hole.
3
Double check the length of each
and set these pieces aside for later
use.
Parts Needed For
Frame Assemblies
9917
5986
STEP
3
15
5986 Rear Wall Angle (2)
9917 Rear Wall Channel (2)
Rear Wall Channel
118 1/8"
STEP
1
Rear Wall Angle
118 1/8"
STEP
2
118 1/8"
Rear Wall Channel
118 1/8"
Rear Wall Angle
300,0 cm
9917
300,0 cm
5986
300,0 cm
300,0 cm
Advertisement
