Setting The Encrypted Reception - Kyocera Triumph-Adler 302ci Operation Manual

Using Convenient Fax Functions > Encryption
8

Setting the Encrypted Reception

To conduct encryption communication operating the receiving system, follow the steps below.
1
2
3
Send Start.
Press the [Start] key.
The transmission will start.
NOTE
When [On] is selected in [Dest. Check before Send], a destination confirmation screen is
displayed when you press the [Start] key.
Confirmation Screen of Destinations (page 7-10)
Register the encryption key ahead of time.
Register the encryption key that you decided upon with the sender.
For the procedure for registering an encryption key, refer to the following:
Registering an Encryption Key (page 5-24)
Display the screen.
[System Menu/Counter] key > [FAX] > [Reception]
Turn on encrypted reception.
1
[Encrypted Reception] > [On]
2
Select the encryption key number that you used to register the encryption key that you
decided upon with the sender.
3
Select [OK].
The machine receives the encrypted originals from the sender of the specified encryption
key.
5-27