Table of Contents
Advertisement
4. Flex the bracket and align pins
2.5-inch internal storage drive. Then install a new 2.5-inch internal storage drive into the bracket. Do not
touch the circuit board
Figure 59. Installing the new 2.5-inch internal storage drive into the bracket
5. Slide the new 2.5-inch internal storage drive into the kit from the rear until the internal storage drive
snaps into position.
Figure 60. Sliding the new 2.5-inch internal storage drive into the kit
6. Pivot the rear cover of the kit inward until you hear a click. The rear cover is secured in place.
84
P320 User Guide
1
,
2
,
3
, and
4
on the bracket with the corresponding holes in the new
5
on the internal storage drive.
Advertisement
Table of Contents
