Table of Contents
Advertisement
Figure 56. Opening the kit from the rear
3. If you are replacing an old 2.5-inch internal storage drive, do the following:
a. Press both clips simultaneously toward each other and slide the 2.5-inch internal storage drive out of
the rear of the kit.
Figure 57. Removing the 2.5-inch internal storage drive from the rear
b. Flex both sides of the bracket to remove the 2.5-inch internal storage drive from the bracket.
Figure 58. Flexing both sides of the bracket to remove the 2.5-inch internal storage drive
.
Chapter 7
Hardware removal and installation
83
Advertisement
Table of Contents
