Table of Contents
Advertisement
Figure 34. Installing the 3.5-inch storage drive into the bracket
6. Slide the bracket with the new 3.5-inch storage drive into the front-access storage enclosure until it
snaps into position. Press the notch to secure the enclosure cover and lock the enclosure cover with the
key.
Figure 35. Installing the 3.5-inch storage drive into the front-access storage enclosure
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 105.
2.5-inch storage drive
To remove or install a 2.5-inch storage drive, do the following:
1. Before removing an old 2.5-inch storage drive, safely eject the old storage drive from the operating
system first. For more information, see the Windows help system.
2. Unlock the enclosure cover with the provided key as shown. Press the notch
cover.
a
to open the enclosure
.
Chapter 7
Hardware removal and installation
73
Advertisement
Table of Contents
