Table of Contents
Advertisement
Figure 54. Sliding the new 3.5-inch internal storage drive into the kit
6. Pivot the rear cover of the kit inward until you hear a click. The rear cover is secured in place.
Figure 55. Pivoting the rear cover inward
2.5-inch internal storage drive
To install or replace a 2.5-inch internal storage drive in the kit, do the following:
1. Slide the kit out of the chassis. See "Optical drive" on page 68.
2. Press the clip as shown to open the rear cover of the kit.
82
P320 User Guide
Advertisement
Table of Contents
