Solutions When The Image Brightness Or Colors Are Incorrect; Solutions When An Afterimage Remains On The Projected Image - Epson BrightLink EB-725Wi User Manual

Parent topic:
Related references
Image Quality Settings - Image Menu
Related tasks
Cleaning the Projection Window
Focusing the Image

Solutions When the Image Brightness or Colors are Incorrect

If the projected image is too dark or light, or the colors are incorrect, try the following solutions:
• Press the Color Mode button on the remote control to try different color modes for the image and
environment.
• Check your video source settings.
• Adjust the available settings on the Image menu for the current input source, such as Brightness,
Contrast, Tint, White Balance, Color Saturation and RGBCMY.
• Make sure you selected the correct Signal Format or EDID setting in the Signal I/O menu, if available
for your video source.
• Make sure all the cables are securely connected to the projector and your video device. If you
connected long cables, try connecting shorter cables.
• Position the projector close enough to the screen.
• Make sure you have run the Light Source Calibration in the Management menu recently. If using
multiple projectors, perform the calibration on all projectors to ensure a consistent image quality.
Parent topic:
Related references
Input Signal Settings - Signal I/O Menu
Administration Settings - Management Menu
Image Quality Settings - Image Menu

Solutions When an Afterimage Remains On the Projected Image

If you see an afterimage in the projected image, select Refresh Mode > Start in the Management menu.
Parent topic:
Related references
Administration Settings - Management Menu
Solving Image or Sound Problems
Solving Image or Sound Problems
Solving Image or Sound Problems
315