Copying Menu Settings Between Projectors - Epson BrightLink EB-725Wi User Manual

Note: You can save the following settings:
• Image menu settings for each color mode
• Video Range and Overscan in the Signal I/O menu
• Light Source Mode and Brightness Level in the Operation menu
• Erase Memory: Erases the selected memory settings
• Rename Memory: Renames a saved memory
• Reset Memory Settings: Delete all saved memory
5. Press Esc to exit.
Parent topic:

Copying Menu Settings Between Projectors

After you select menu settings for your projector, you can transfer them to another projector of the same
model.
Note: Copy the projector's settings before you adjust the projected image using the projector's Geometry
Correction settings. Any saved User's Logo setting on the projector will transfer to the other projector.
Caution: If the copy process fails due to a power failure, communication error, or for any other reason,
Epson will not be responsible for any repair costs incurred.
The following settings will not transfer between projectors:
• Light Source Hours
• Status
The following settings will not transfer between projectors if you set the Batch Setup Range setting to
Limited:
• Password Protection settings
• EDID in the Signal I/O menu
• Network menu settings
Saving Settings to a USB Flash Drive
Transferring Settings from a USB Flash Drive
Saving Settings to a Computer
Adjusting Projector Features
174