Calibrating Manually - Epson BrightLink EB-725Wi User Manual

This screen appears:
3. Adjust the image focus, if necessary.
4. Check that the image pattern fits into the projected display, then press
A pattern appears then disappears, and the system is calibrated. If you see a message that
calibration failed, you need to calibrate manually.
The cursor location and pen position should match after calibration. If not, you may need to calibrate
manually.
Parent topic:

Calibrating Manually

If the cursor location and pen position do not match after auto calibration, you can calibrate manually.
Pen Calibration
197
Enter to select Yes.