Epson BrightLink EB-725Wi User Manual page 266

Setting
Auto Power On
Sleep Mode
Sleep Mode Timer
A/V Mute Timer
Standby Mode
Port
Quick Startup
Options
HDMI1
Computer1
USB Display
Off
On
Off
1 to 30 minutes
On
Off
Communication On
Communication Off
Wired LAN
Wireless LAN
Off
20min.
60min.
90min.
266
Description
Selects whether to automatically
turn on the projector when you
connect an input signal to a
specific input source; USB
Display is only available when
USB Display is enabled
Automatically turns off the
projector after an interval of
inactivity
Sets the time before the projector
automatically turns off (Sleep
Mode must be turned on)
Automatically turns off the
projector after 30 minutes of
inactivity
Enable this setting to allow
monitoring and control of the
projector over a network when
the projector is in standby mode
(setting is displayed only when
A/V Output is set to While
Projecting)
Selects the port to use while the
Standby Mode setting is set to
Communication On
Sets the time period for which
you want to be able to restart the
projector within five seconds of
turning it off (Quick Start mode).
It may take longer than five
seconds when projecting from
the projector's USB port or when
using the Screen Mirroring
features.